|
Post by Guided_Surgery on Jan 20, 2013 19:34:08 GMT -5
Fully edentulous case for overdenture, with tube and ThinLayer™ GuidesImplants were placed at the teeth #21, 25, and 28 sites. The surgery was performed with the tube and ThinLayer™ guides from Guided Surgery Solutions, who manufacture the guides from the 3D plan developed in Blue Sky Plan, and provide custom drill stops for each drill in the sequence. The inner diameter of each drill stop holds it flush to the drill shaft and fluted area. The outer diameter of each stop is flush with the inner diameter of the tube (in the tube guide) and the diameter of the hole in the ThinLayer™ Guide. The ThinLayer™ Guide allows the flaps to be reflected with visual and physical access to the surgical site. The flap was reflected and the implant inserted in the sites through the guide hole in the ThinLayer™ guide. The site was visible as the implant was placed 4 mm below the adjacent crest at #25. The crest was leveled by removing 4 mm of crestal bone adjacent to the tooth #25 site implant. Full description and picture set available at: www.guidedsurgerysolutions.com/portfolio/case-mh-edentulous/Attachments:
|
|